Configuration summary
On this page you will find a summary of the configuration you have made, which will be sent to our sales department for further processing after your confirmation.
Source Article | EXM1-M03-0124-16/1 |
Corner chamfer angle | 45 ° |
Corner radius (R) | 1 mm |
Corner type | Corner radius |
Cutting diameter (D1) | 16 mm |
Cutting direction | Right |
Cutting edge count (Z) | z6 # |
Cutting end diameter (D4) | 16 mm |
Cutting geometry | Non-center cutting |
Cutting length (L2) | 67 mm |
Cutting profile | Chip breaker |
Helical pitch | 40 ° |
Polished flutes | Application specific |
Spiral direction | Right |
Tip angle | 90 ° |
Total length (L1) | 125 mm |
Unequal tooth pitch | Yes |
Coating | No |
Milling cutter type | Chipmaker |
Milling operation | Side milling |
Cooling | Dry |
Cooling duct | No |
Chamfer length (shank) | 0.8 mm |
Shank diameter (D2) | 16 mm |
Weldon | HB - Weldon |
Angle beta (β) | 0.0 |
Undercut diameter (D3) | 16 mm |
Undercut geometry | Straight undercut |
Request a quote