Configuration summary
On this page you will find a summary of the configuration you have made, which will be sent to our sales department for further processing after your confirmation.
Source Article | EXPK1-M07-0043-6 |
Corner chamfer angle | 45 ° |
Corner type | Corner radius |
Cutting diameter (D1) | 6 mm |
Cutting direction | Right |
Cutting edge count (Z) | z4 # |
Cutting end diameter (D4) | 6 mm |
Cutting geometry | Non-center cutting |
Cutting length (L2) | 5.8 mm |
Cutting profile | Default |
Helical pitch | 15 ° |
Polished flutes | Application specific |
Programming radius (R) | 1 mm |
Spiral direction | Right |
Tip angle | 90 ° |
Total length (L1) | 100 mm |
Unequal tooth pitch | Yes |
Coating | Application specific |
DIN material | K |
Material | K1.1 - K1.2 |
Milling cutter type | Blademaker |
Milling operation | Multipass milling |
Cooling | Dry |
Cooling duct | No |
Chamfer length | 0.4 mm |
Shank diameter (D2) | 6 mm |
Weldon | HA - without weldon |
Angle alpha (α) | 20 ° |
Angle beta (β) | 0.0 |
Undercut diameter (D3) | 5.2 mm |
Undercut geometry | Straight undercut |
Undercut length (L3) | 28 mm |
Request a quote