Configuration summary
On this page you will find a summary of the configuration you have made, which will be sent to our sales department for further processing after your confirmation.
Source Article | EXPK1-M04-0043-8 |
Corner chamfer angle | 45 ° |
Corner chamfer length | 0.3 mm |
Corner type | Corner chamfer |
Cutting diameter (D1) | 8 mm |
Cutting direction | Right |
Cutting edge count (Z) | z7 # |
Cutting end diameter (D4) | 8 mm |
Cutting geometry | Non-center cutting |
Cutting length (L2) | 32 mm |
Cutting profile | Default |
Helical pitch | 40 ° |
Polished flutes | Application specific |
Spiral direction | Right |
Tip angle | 90 ° |
Total length (L1) | 80 mm |
Unequal tooth pitch | Yes |
Coating | Application specific |
DIN material | K |
Material | K1.1 - K1.2 |
Milling cutter type | Mirrormaker |
Milling operation | Side milling |
Cooling | Dry |
Cooling duct | No |
Chamfer length | 0.6 mm |
Shank diameter (D2) | 8 mm |
Weldon | HA - without weldon |
Angle alpha (α) | 20 ° |
Angle beta (β) | 0.0 |
Undercut diameter (D3) | 7.8 mm |
Undercut geometry | Straight undercut |
Undercut length (L3) | 40 mm |
Mögliche Alternativprodukte
Ist ein Sonderfräser wirklich notwendig? Alternativprodukte aus unserem Katalog:
EXPK1 Mirrormaker Z7 4xD AFPX
EXPK1-M04-0043-8
EXPK1 Mirrormaker Z7 5xD AFPX
EXPK1-M04-0053-8
EXPK1 Mirrormaker Z7 5xD AFPX
EXPK1-M04-0053-8/0,5
Angebot anfragen