Configuration summary
On this page you will find a summary of the configuration you have made, which will be sent to our sales department for further processing after your confirmation.
Source Article | K202163-8/2 |
Corner chamfer angle | 45 ° |
Corner radius (R) | 2 mm |
Corner type | Corner radius |
Cutting diameter (D1) | 8 mm |
Cutting direction | Right |
Cutting edge count (Z) | z4 # |
Cutting end diameter (D4) | 8 mm |
Cutting geometry | Center cutting |
Cutting length (L2) | 9 mm |
Cutting profile | Default |
Helical pitch | 40 ° |
Polished flutes | Application specific |
Spiral direction | Left |
Tip angle | 90 ° |
Total length (L1) | 64 mm |
Unequal tooth pitch | Application specific |
Coating | Application specific |
DIN material | O |
Material | O1.1 |
Milling cutter type | Formmaker |
Milling operation | Side milling |
Cooling | Dry |
Cooling duct | No |
Chamfer length | 0.6 mm |
Shank diameter (D2) | 8 mm |
Weldon | HA - without weldon |
Angle beta (β) | 0.0 |
Undercut diameter (D3) | 7.4 mm |
Undercut geometry | Straight undercut |
Undercut length (L3) | 27 mm |
Angebot anfragen