Guided configuration

Step by step to the solid carbide special milling cutter.

Your tool code: CTSZ5M18

Material selection Milling operation Milling cutter type Milling environment

Which material should be processed? Which milling operation should be possible with the tool? Which cutter type should be used? How should the tool be used?

H&V material table

Material selection from the brochures.

  • N1.1
    ALUMINUM | alloyed <500N
  • N1.2
    ALUMINUM | alloyed <600N
  • N2.1-2.3
    ALUMINIUM | casted <600
  • N3.1
    COPPER | alloyed <600N
  • N4.1
    MAGNESIUM | alloyed <200N
  • N5.1
    PLASTICS | thermoplastics <100 N
  • N5.2
    PLASTICS | duroplastics <150 N
  • P1.1
    STEEL | unalloyed <500 N
  • P1.2-1.5
    STEEL | unalloyed <1100 N
  • P2.1-2.2
    STEEL | low alloyed <950 N
  • P2.3-2.4
    STEEL | low alloyed <1300 N
  • P3.1-3.2
    STEEL | high alloyed <1100 N
  • P3.3
    STEEL | high alloyed <1400 N
  • H1.1
    HARDENED STEEL | 46-55HRC
  • H1.2
    HARDENED STEEL | 56-60HRC
  • H1.3
    HARDENED STEEL | 60-65HRC
  • H1.4
    HARDENED STEEL | 66-70HRC
  • M1.1
    STAINLESS STEEL | ferritic/martensitic <850 N
  • M2.1
    STAINLESS STEEL | austenitic <650 N
  • M2.2
    STAINLESS STEEL | austenitic <750 N
  • M3.1
    DUPLEX STEEL | super austenitic <1100 N
  • S1.1
    IRON BASED ALLOY | HRSA <1200 N
  • S1.2
    NICKEL-BASED ALLOY | HRSA <1450 N
  • S1.3
    COBALT BASED ALLOY | HRSA <1200 N
  • S2.1
    TITANIUM | pure; alloyed <600N
  • S2.2
    TITANIUM | alloyed <1000N
  • S2.3
    TITANIUM | alloyed <1400N
  • K1.1-1.2
    CASTING | gray cast iron <1000 N
  • K2.1-2.2
    CASTING | modular cast iron <850 N
  • K3.1-3.2
    CASTING | malleable cast iron <800 N
  • O1.1
    PLASTICS | fiber composites content
  • O1.2
    PLASTICS | fiber composites
  • O2.1
    GRAPHITE | pure

DIN material

Choose your material based on DIN ISO 513.

  • P
    Unalloyed and high-alloy steels, cast iron
  • M
    Stainless steels
  • K
    Cast iron
  • N
    Non-ferrous metals
  • S
    Heat Resistant Super Alloys (HRSA)
  • H
    Hardened steel (45-68 HRC)
  • O
    Non-ISO

When selecting a material from the DIN/ISO material list, the selection of the material table from the brochures is reset, since this extends the DIN/ISO material list and no assignment to an upper material is possible.


Entering the optional material key has no effect on the selection in the material selection fields.

Side milling

Side milling

Full slot milling

Full slot milling

Multipass milling

Multipass milling

Chamfering

Chamfering

Round profile milling

Round profile milling

Since it is possible to select more than one milling operation, the next step is only possible when a conflict of milling operations that cannot be used together is resolved.

No compatible cutter types found!

Unfortunately, there is no cutter type available for the selected milling operations. Go back one step and adjust the milling operations!

What kind of cooling would you like?

At what max. speed can you operate?

rpm

How would you like to clamp your cutter?

Do certain cutting data have to be observed?

rpm
mm/T
mm
mm

The information on this page is optional and does not affect the configuration, but will help in creating the ideal tool.